Steam Generator

For years we have used steam to hydrate every foeder that leaves our shop. We have found no better way to clean a tank or keep it hydrated; however, the size and cost of industrial steam/boiler systems kept them out of reach of most of our customers. We teamed up with a leading American manufacturer to make a small, relatively inexpensive unit that suits the needs of Foeder Crafters and our clients.

FEATURES:

  • Stainless steel tank and water level probes provide years of
    trouble-free operation

  • Removable heating elements provide easy and economical service

  • Simple on/off controls

  • Small size allows unit to be moved easily

  • ETL listed for USA and Canada

  • Tested to IEC standards

  • One-year commercial warranty

ELECTRICAL INFORMATION:

  • 8-foot 220v locking L6-30P power adapter installed

  • 30A dedicated circuit required

  • Can be hard wired in the field for 208-240v 1/3 phase power

PLUMBING INFORMATION:

  • Water inlet: 3/8” NPT

  • Steam outlet: 1½” tri-clamp adapter

  • Pressure relief: ¾” NPT

  • Drain outlet: ¾” NPT

INSTALLATION:

  • Install in dry, well ventilated area.

  • Install generator level hung on a wall.

  • Provide adequate access for service.

  • Run cold (preferably conditioned) water line with shut off valve.

  • Run steam line as short as possible. Slope pipe/hose to avoid creating condensation build up. Do not create traps or pipe obstructions.

  • Run ¾” pressure relief and drain lines in accordance with codes.

DIMENSIONS AND WEIGHT:

  • 16½” x 15” x 6¼”

  • 35 lbs.